Other materials can be made into ultra-thin nanosheets. Jon Evans finds out whether they can generate the same buzz
© Andras Kis
The problem with being a champion, of course, is that you’re always being challenged by upstarts looking to usurp your position, and this is beginning to happen with graphene. Like graphene, these upstarts are two-dimensional crystals consisting of a thin layer of atoms, and while they possess many of the same properties as graphene they also boast a couple of new ones. Although they haven’t yet succeeded in pushing graphene off its perch, they’ve certainly managed to muscle their way on there as well.
‘When people were getting a bit tired with graphene, two-dimensional crystals appeared and brought a new rival into the area,’ says Novoselov. Far from being a threat, however, these new rivals could end up being the making of graphene.
Transition metals
It was actually Novoselov and Geim who first showed that the same process they used to produce graphene, which involved carefully pulling a single layer of graphene from a lump of graphite with a piece of sticky tape, could also produce other two-dimensional crystals. In a 2005 paper,1 they reported using this technique to produce a range of two dimensional crystals from materials with a similar layered structure to graphite, including molybdenum disulfide (MoS2), niobium diselenide (NbSe2) and boron nitride (BN).
It is by combining different 2D materials that researchers hope to make the most out of them © Andras Kis
Unlike graphene, these compounds don’t actually consist of a single layer of atoms. Rather, they comprise a layer of transition metal atoms sandwiched between two layers of chalcogen atoms. However, the atoms in these three layers are strongly held together by covalent bonds, whereas each three-layer sheet is only linked to its neighbours by weak van der Waals bonds, allowing individual sheets to be separated from each other.
Despite the different atomic structure, transition metal dichalcogenides share some of graphene’s impressive properties, driven by the fact that they are essentially all surface. Both are obviously very thin, although graphene is thinner, and both are very strong, although graphene is stronger. They also share some of the same challenges, especially in terms of finding methods to produce them at large scales. Painstakingly peeling individual two-dimensional sheets from a three-dimensional crystal, known as mechanical exfoliation, clearly does not lend itself to mass production.
For transition metal dichalcogenides, better methods include chemical exfoliation, in which three-dimensional crystals are sonicated in solvents to release individual sheets, and chemical vapour deposition (CVD), which is already commonly used to produce carbon nanotubes. CVD involves passing one or more gases containing the component elements over a flat substrate, where they react together to form the two-dimensional crystal. One problem with these methods, however, is that the sheets they produce often aren’t as pristine as those produced by mechanical exfoliation, tending to contain more defects.
Interesting differences
It’s the ways in which the other two-dimensional crystals differ from graphene that offer most promise, however. Graphene is better at conducting electricity than copper, but many transition metal dichalcogenides are natural semiconductors, and boron nitride is an insulator. Furthermore, different transition metal dichalcogenides possess different semiconducting properties. So while graphene does undoubtedly possess some impressive physical properties, the broad suite of other two-dimensional crystals, including over 40 different transition metal dichalcogenides, gives scientists a lot more to play with.
Membranes of MoS2 can be used to detect compounds by changes in their resonant frequency © Philip Feng, Zenghui Wang / Case Western Reserve University
Scientists have recently discovered that the same thing happens with other two-dimensional crystals. In 2013, Philip Feng and his colleagues at Case Western Reserve University in Cleveland, US, showed that suspended sheets of MoS2 can actually vibrate faster than graphene, suggesting they could make even more sensitive sensors.2
‘We’ve been actively studying MoS2 nanomechanical resonators vibrating at very high frequencies (in the VHF radio band), as high frequency devices require them to be smaller, thus offering higher speed and higher responsivity and sensitivities to external stimuli and disturbances,’ explains Feng. ‘So VHF MoS2resonators have strong potential for detecting specific compounds in gas-phase sensing and analysis.’
Feng is also looking to enhance the sensing abilities of MoS2 still further, by combining the resonator and conductivity detection mechanisms; he is helped in this aim by the fact that MoS2 is a semiconductor. ‘By combining the attractive coupled electro-mechanical properties, we hope to develop interesting sensors with more integrated functionalities,’ he says.
In other cases, it means that transition metal dichalcogenides can achieve feats that are simply not possible for graphene. For example, unlike graphene, transition metal dichalcogenides have catalytic abilities, with MoS2 being able to catalyse hydrogen evolution reactions. Studies have shown that it’s the edges of MoS2sheets that are responsible for this catalytic activity, which is usually fairly weak.
Recently, however, materials scientists from the US and Korea, led by Jiaxing Huang at Northwestern University in Illinois, have managed to increase the catalytic activity of both MoS2 and tungsten sulfide (WS2) by depositing gold nanoparticles on them.3 They do this by simply mixing chemically exfoliated sheets of MoS2 and WS2 with hexachloroauric acid in water, with the sheets reducing the acid and causing gold nanoparticles to form on their surface.
Interestingly, this process works best with sheets possessing lots of defects, as the gold nanoparticles preferentially form at defect sites such as sheet edges and grain boundaries, where the three layers making up individual sheets don’t quite line up with each other. Huang and his team found that covering sheets of MoS2 and WS2 with gold nanoparticles in this way greatly enhances their ability to catalyse hydrogen evolution reactions.
Huang says this increase in catalytic activity is probably due to the gold nanoparticles enhancing charge transport between different sheets, which suggests that these gold-covered sheets should be able to catalyse any electrocatalytic reactions. In addition, Huang thinks the same basic approach could be used to cover the sheets with various other nanoparticles, potentially allowing them to catalyse other types of reactions.
Perfectly useful imperfections
Defects may also be responsible for another interesting property that so far has only been predicted for transition metal dichalcogenides. Scientists in the US, led by Boris Yakobson at Rice University in Houston, recently calculated that transition metal dichalcogenides should be magnetic, at least at grain boundaries.4
Transition metal dichalcogenides can have magnetic properties at grain boundaries (red = spin-oriented; green = opposite spin) © Zhuhua Zhang, Rice University
The next step is to detect this magnetism experimentally, which is far from easy at these small scales. So Yakobson is now looking to collaborate with a team from Tsinghua University in Beijing, China, to obtain this experimental proof. If they do find it, this will offer further evidence that transition metal dichalcogenides are actually better positioned than graphene to transform computing.
Modern computing is built on the semiconducting properties of silicon; in particular, its ability to allow current to pass under certain conditions but not under others. This allows the creation of the switch-like transistors that physically underpin the digital world’s ones and zeroes.
The problem with graphene is that it isn’t a semiconductor, it’s a very efficient conductor: a switch that can’t be turned off. Graphene can be transformed into a semiconductor by chemically modifying it or by physically deforming it, but transition metal dichalcogenides such as MoS2 are natural semiconductors. Find a way to construct transistors out of them and you can shrink computer circuits down to atomic scales, a feat that would be impossible with conventional silicon-based technology.
If transition metal dichalcogenides turn out to be magnetic as well, then that raises the possibility of using them to develop a whole new type of computing, in which the digital ones and zeroes are encoded in the spin states of electrons, rather than in electric charge. Known as spintronics, this switching between spin states can be achieved with an applied magnetic field and should offer much faster computer processing.
Some scientists have even suggested that transition metal dichalcogenides could form the basis for yet another new type of computing, known as valleytronics. Electrons travel through crystals in waves, with these waves located in certain valleys of minimum energy. In valleytronics, the idea is to switch electrons between two different valleys as a way to encode the digital ones and zeroes. Rather handily, MoS2possesses two such valleys and a couple of research groups recently showed that it was possible to switch electrons between these two valleys using polarised light.5
Life in the old graphene yet
All is not lost for graphene, though, because although modern computer circuits are built on semiconductors, they also require conductors and insulators. Thus, if you want to construct an atomic-scale circuit from transition metal dichalcogenides, you’ll also need to use graphene as the conductor and maybe boron nitride as the insulator.
This is exactly what Andras Kis and his colleagues at the Swiss Federal Polytechnic School in Lausanne have done. In 2011, they created a transistor consisting of a single layer of MoS2 as a semiconducting channel between two gold electrodes,6 before then replacing them with two graphene electrodes. Most recently, by placing a third layer of graphene on top of the MoS2 layer to act as charge trapping device known as a floating gate, they created a nonvolatile memory cell.7 Kis and his colleagues have already started to connect a few of these transistors and memory cells together to form simple circuits.
Indeed, the real potential of two-dimensional crystals comes not from using them in isolation but in joining them together to form heterostructures. If you join lots of graphene sheets together then you get bulk graphite and if you join together lots of MoS2 sheets together then you get bulk MoS2. But if you join graphene sheets and MoS2 sheets together, then you get a material that doesn’t exist in nature and may possess some very interesting properties.
Novoselov’s team has created an efficient solar cell using layers of graphene and tungsten disulfide sheets © Konstantin Novoselov
By sandwiching a sheet of WS2 between two sheets of graphene, Novoselov and his team have already managed to produce a very efficient solar cell.8 The graphene sheets are chemically modified such that electrons are the major charge carrier in one of them and holes (gaps produced by missing electrons) are the major charge carrier in the other.
Graphene is naturally transparent and so the two graphene sheets allow light to pass through them to the semiconducting WS2 sheet. As is the case with silicon, when light hits the WS2 sheet, it generates electron·hole pairs. The electrons and holes are immediately attracted towards different graphene sheets, as one sheet is negatively charged while the other is positive, pulling the electron·hole pairs apart and generating an electric current.
In developing such heterostructures, scientists already have a lot of two-dimensional crystals to choose from, with graphene and the many different transition metal dichalcogenides, but new two-dimensional crystals continue to appear. Over the past few years, several research groups have claimed to produceatom-thick layers of silicon, termed silicene, while US scientists recently predicted that an atom-thick layer of tin – dubbed stanene – will be a topological insulator with lossless electronic conduction zones.
If this continues, graphene’s perch could soon become rather crowded.
Jon Evans is a science writer based in Bosham, UK
REFERENCES
1 K S Novoselov et al, Proc. Natl. Acad. Sci. USA, 2005, 102, 10451 (DOI: 10.1073/pnas.0502848102)
2 J Lee et al, ACS Nano, 2013, 7, 6086 (DOI: 10.1021/nn4018872)
3 J Kim et al, J. Phys. Chem. Lett., 2013, 4, 1227 (DOI: 10.1021/jz400507t)
4 Z Zhang et al, ACS Nano, 2013, DOI: 10.1021/nn4052887
5 H Zeng et al, Nat. Nanotechnol., 2012, 7, 490 (DOI: 10.1038/nnano.2012.95)
6 S Bertolazzi, J Brivio and A Kis, ACS Nano, 2011, 5, 9703 (DOI: 10.1021/nn203879f)
7 S Bertolazzi, D Krasnozhon and A Kis, ACS Nano, 2013, 7, 3246 (DOI: 10.1021/nn3059136)
8 L Britnell et al, Science, 2013, 340, 1311 (DOI: 10.1126/science.1235547)
3 January 2014
Courtesy of: ChemistryWorld: http://www.rsc.org/chemistryworld/2014/01/2d-materials-graphene
